Photo Chemical Spill Kits

Photo Chemical Spill Kits
zoom Zoom image
Absorbs 20L (Water) - 18L Labelled tote box - Suitable for common photo processing solutions.

Designed specifically for photo labs, schools, commercial and retail-based processing machines and other locations where standard photo chemicals are used and stored. Suitable for DG8 Corrosives, including both acids and alkalis.

Highly absorbent, effective and competitively priced. Kits can also be customised to suit the level of risk. Ensure a photo lab spill kit is available at any location where photo processing chemicals are used. Photo lab chemical safety precautions should always be taken to reduce the risk of damage caused by a chemical spill. In the evnt of a spill or leak, use a photo lab chemical spill kit immediately.

Features
  • Contains synthetic pads and organic absorbent containment sock, PPE and clean-up accessories.
  • Comes in 18L clear re-sealable tote boxes.
  • Absorbs up to 20 litres of water-based liquid.
  • Ideal for retail photo processing machines where chemical reservoirs are frequently re-filled or replaced.
Benefits
  • Mobile kit for fast response. Highly visible, safe and easy to use.
  • Effective on a wide range of photo chemicals.
  • Can be customised to suit level of risk, including the addition of extra personal protective equipment.
  • Enretech's organic sorbents offer significant environmental benefits over other sorbents.
Contents:Quantity
Storage Box and Lid 1
Nitrile Gloves- Disposable 2
Absorbent Containment Sock (Universal) 1.2m x 10cm diameter 1
Absorbent Pads (Universal) 430 x 480mm 10
Safety Glasses (with side shields) 1
Disposable Apron 80 x 125cm 1
LDPE Waste Disposal Bag and tie 450 x 710mm 1
Instruction Card and SOP A4 1
Australian Standards Compliance:

All Enretech kits comply with the latest Australian Standards and Federal NOHSC (ASCC) Codes or Practice that pertain to the handling, storage, clean-up and disposal of Dangerous Goods and Hazardous Substances: NOHSC: 2007(1994), 1005(1994), & 1015(2001) and AS/NZS 3816:1998, AS1940-2004, AS3780-1994, & AS2507-1998.

Caution:

Not suitable for Hydrofluoric Acid or strong oxidisers such as Nitric Acid (40% or higher), Hydrogen Peroxide (27% or higher), etc. Acidic wastes must always be segregated from alkaline wastes while being stored for eventual collection and disposal. Silver may be found in significant concentrations in fixer solution and is a toxic contaminant that can disturb the biological action of a sewage treatment plant and harm aquatic life such as fish and other organisms. Some individuals can have allergic responses to sulphites in photo-processing solutions.

Click the following link for more information on Photo Lab Chemical Spill Kits:

Photo Lab Chemical Spill Kit

0.00 EUR